M24x1,5. Oil refilling. For oil drain and oil filler. For oil filler, transmission. (for oil drain and oil filling). (oil filling and oil drain at transmission). For filling in oil or draining off oil resp. At transmission for filling in oil up to transmission 6515822. For oil drain and oil tilling.

As required 2,8 mm.

As required 3,2 mm.

As required 4,0 mm.

Only used with asd.

Only used with asd. Rear axle output.

Less lining. With 5 shackles.

Less lining. With 4 shackles & 2 notches.

1:3.29.

Z=29 i=3.27.

4.30 mm. 4.30 mm.

3.60 mm. 3.60 mm.

4.05 mm. 4.05 mm.

3.95 mm. 3.95 mm.

4.00 mm. 4.00 mm.

Interior flange.

Left.

Bearing cover to axle housing. Clutch pressure plate to flywheel m8x22. Ring cylinder to rear axle housing m 8x12.

Gasket kit.

Inside right.

As required 1.75 mm. Axle shaft flange to axle housing.

As required 2.0 mm. 2.00 mm.

Spacer Washer

As required 2.4 mm. 2.40 mm.

Spacer Washer

As required 1.6mm. 1.60 mm.

2.05 mm.

Pinion bearing. Only used with asd. Drive pinion.

Drive pinion bearing. Outer bevel gear.

Drive pinion.

Joint flange 90mm. Propeller shaft.

End cover.

M10X25
Diameter: 10mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Console mounting, left. Mount to body. Protective plate to frame m 10x25. Shock absorber to transverse control arm. To 001 542 63 20. Hydropneumatic spring leg to rear axle. Shock absorber to rear axle.

Rear axle housing with differential. M 14 x 1,5. Differential gear. Right m 14x1,5.