Rear axle housing with differential abs 1:3.27.

Axle Housing

Rear axle housing with differential abs 1:3.27.

Rear Axle Housing

Rear axle housing with differential abs 1:2,85.

Rear axle housing with differential abs 1:3.92.

Used without with acceleration skid control (asr). Only used with asd.

Less ring gear and pinion.

Less ring gear and pinion.

1.3 mm as required. 1.30 mm.

1.4 mm. 1.40 mm. 1.40 mm as required. 1.40 mm.

1.6 mm. 1.60 mm.

1.45 mm.

Side Gear

Used without automatic locking differential (asd).

Only used with asd. Rear axle output.

Only used with asd.

Ring Gear and Pinion

Only used with asd 1:3.92.

1:3.27.

1:3.27.

Z=34.

Z=24 1:3.92.

Ring gear bearing.

4.00 mm. 4.00 mm.

4.30 mm. 4.30 mm.

3.80 mm. 3.80 mm.

4.05 mm. 4.05 mm.

As required 4.4 mm. 4.40 mm.

3.95 mm. 3.95 mm.

Seal Ring

Interior flange.

Inside.

1.10 mm.

0.85 mm.

As required 1.3 mm. 1.30 mm.

As required 1.5mm. 1.50 mm.

1.25 mm.

0.95 mm.

As required 1.0 mm. 1.00 mm.

As required 1.75 mm. Axle shaft flange to axle housing.

As required 1.9 mm. 1.90 mm.

As required 1.7 mm. 1.70 mm.

As required 2.1 mm. 2.10 mm.

Spacer Washer

As required 2.0 mm. 2.00 mm.

As required 1.5mm. 1.50 mm.

2.25 mm.

Pinion bearing. Only used with asd. Drive pinion.

Drive pinion bearing.

Drive pinion.

Drive pinion. Joint flange.

Collar Nut, Ra Transm

M26X1.5
Diameter: 26mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 38mm
Width across flats: 30mm. Joint flange to bevel gear. Screw fitting joint flange. Flange to drive pinion. Only used with asd.

Cover to axle housing.

Rear axle housing with differential. M 14 x 1,5. Differential gear. Right m 14x1,5.