Rear axle center assembly with flange i = 2.82.

Housing

Rear axle center assembly without flange.

Rear axle.

To rear axle housing. Rear axle housing with differential. Left rear axle housing.

As required 1,50 mm. 1.50 mm.

As required 1,70 mm. 1.70 mm.

As required 1,60 mm. 1.60 mm.

As required 1,45 mm. 1.45 mm.

As required 1,40 mm. 1.40 mm.

1:2.82. 1:2.82.

1 : 2.65.

Ring gear to differential case. M12x1x26.

Ring gear bearing.

Bearing left and right. 3.70 mm. As required 3.70 mm. 3.70 mm.

Fuse

As required 4.10 mm. 4.10 mm.

Fuse

As required 3.90 mm. 3.90 mm.

As required 4.40 mm. 4.40 mm.

Bearing left and right. 4.50 mm. As required 4.50 mm. 4.50 mm.

Spacer Washer

As required 1.4 mm. 1.40 mm.

1.80 mm.

As required 1.1 mm. 1.10 mm.

As required 1.5mm. As required 1.50. 1.50 mm.

Bearing cover to axle housing. Clutch pressure plate to flywheel m8x22. Ring cylinder to rear axle housing m 8x12.

Interior flange.

Parts Kit, Rr. Axle Diff

Axle shaft to rear axle shaft flange left. Axle shaft to interior flange. Propeller shaft to flange. Rear wheel bearing, left and right.

Interior flange.

As required 1.65 mm. 1.65 mm.

As required 1.40 mm. 1.40 mm.

As required 2.00 mm. 2.00 mm.

As required 1.85 mm. 1.85 mm.

As required 1.90 mm. 1.90 mm.

As required 2.10 mm. 2.10 mm.

As required 2,25 mm.

As required 1,90 mm.

As required 1,80 mm.

As required 1,55 mm.

As required 2.35 mm (c 36 amg).

As required 1,60 mm.

As required 2,10 mm.

As required 1,70 mm.

As required 1,85 mm.

Drive pinion.

Drive pinion.

Drive pinion. M40.5x1.5.

Propeller shaft 110mm.

Drive pinion.

Nut

M29X1.5
Diameter: 29mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 48mm
Width across flats: 41mm. Screw fitting joint flange. Flange to drive pinion. E63. C300, C300 4-matic. Manual trans. Joint flange to crown gear. Joint flange threaded connection. Joint flange to bevel gear.

Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm.

To axle housing.

Extension to axle housing.

Mounting parts. Fastening parts to spring link.

Rear axle housing with differential. M 14 x 1,5. Differential gear. Right m 14x1,5.

Cap

To rear axle differential. . Rear axle housing. Breather. Vent tube.