Steering Knuckle and Transverse Control Arm for 2008 Mercedes-Benz C350

Front left.

Between rpm sensor and steering knuckle.

Wheel hub, left.

M6X25
Diameter: 6mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Lock wedge to door. Striker to door. Left clamping piece. Wheel hub to kingpin. Front wheel hub to steering knuckle, left and right.

Rolling-Element Bearing

Wheel hub, left. Repair kit. Front wheel bearing.

On left without bearing. Front left, without bearing.

Left with bearing.

Rubber Bushing

Strut rod. Left.

For adjusting work only. Only for adjustment operations, left. Left, for adjusting only.

Hex. Nut W Flange + Piece

Only for adjustment operations. M14x1.5. For adjusting work only. Mounting, spring link. Left, for adjusting only. Torque strut to frame-type integral support, left and right.

M14X1.5
Diameter: 14mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 21mm. Strut rod to integral carrier. Cross strut to integral carrier. Transverse control arm to left steering knuckle. Torque strut to frame-type int. Supp.. Lower transverse control arm to left wheel carrier.

Strut rod to integral carrier, left. M14X1,5
Diameter: 14mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 21mm. Strut rod to left steering knuckle. Link rod to torsion bar. Torque strut to integral carrier, left. Cross strut to steering knuckle, left. Torsion bar linkage to torsion bar, left and right. Torque strut at steering knuckle, left.

Right.