At pressure line. 8x2mm. High pressure hose. 8x2mm. Connector hose. 8X2MM. Left. 8x2mm. To low-pressure line. 8x2mm.

From radiator to reservoir.

Fastening, hydraulic lines. Line mounting. Fastening, lines active body control to radiator. Return line to abs radiator. To frame-type integral support. Attachment for steering-gear oil lines.

From valve block front to suspension strut front right.

From expansion tank to additional tank. Right. For molded hose. Line to rear floor center. Fastening, cable, rear center. High pressure expansion hose & connecting hose to side member. Oelverbindungsschlauch durch traeger oelvorratsbehaelter.

From valve block front to suspension strut front left.

From y-distributor to valve block front.

Return line fastening. Fastening, suspension strut line at left and right. Fastening, hydraulic lines. To firewall and longitudinal member. Low-pressure line to frame-type integral support. Line attachment. Line to rear floor center. Front right. Fastening, hose package.

From t-piece to return accumulator rear (inlet).

From t-piece to return accumulator rear (return).

From return oil line to valve block rear.

From valve block front to separation point on main floor (inlet).

From valve block front to separation point on main floor (return).

From pulsation damper to t-piece (return).

Bracket to c-pillar. Additional pump m6x10. Bracket to support m 6x10. Front axle brake hose. Hook to side panel m 6x10. At steering gear m6 x 10. Horn to bracket m6x10. On upper frame cross member. Charge plunger unit.

Pressure hose to pump. M6X20
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Delivery line to pump. High-presssure hose on pump. Hydraulic line to pump. High pressure line to pump.

From pressure reservoir to valve block rear.

From rear valve block to connecting hose left rear.

From rear valve block to connecting hose right rear.