M24x1,5. Oil refilling. For oil drain and oil filler. For oil filler, transmission. (for oil drain and oil filling). (oil filling and oil drain at transmission). For filling in oil or draining off oil resp. At transmission for filling in oil up to transmission 6515822. For oil drain and oil tilling.

1.55 mm.

1.65 mm.

1.45 mm.

1.35 mm.

1.4 mm. 1.40 mm. 1.40 mm as required. 1.40 mm.

Only used with asd. Rear axle output. Differential gear.

Used without automatic locking differential (asd). Rear axle output.

Z=28 1:3.46. Z=26.

3.60 mm. 3.60 mm.

As required 4.4 mm. 4.40 mm.

4.20 mm. 4.20 mm.

4.00 mm. 4.00 mm.

3.95 mm. 3.95 mm.

Inside.

As required 0.9 mm. 0.90 mm.

As required 1.75 mm. Axle shaft flange to axle housing.

Spacer Washer

As required 1.6mm. 1.60 mm.

Spacer Washer

As required 1.9 mm. 1.90 mm.

As required 1.7 mm. 1.70 mm.

Spacer Washer

As required 1.8mm. 1.80 mm. As required 1.85 mm.

Pinion bearing. Only used with asd. Drive pinion.

Drive pinion bearing. Outer bevel gear.

Drive pinion. Joint flange.

Nut

M26X1.5
Diameter: 26mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 38mm
Width across flats: 30mm. Joint flange to bevel gear. Screw fitting joint flange. Flange to drive pinion. Only used with asd.

Cover to axle housing.

OIL DRAIN, PORTAL AXLE LH
Strength / hardness class: AL
Inside diameter: 24mm
Outside diameter: 29mm
Material thickness: 2mm. To left housing
Strength / hardness class: AL
Inside diameter: 24mm
Outside diameter: 29mm
Material thickness: 2mm. To left portal transmission
Strength / hardness class: AL
Inside diameter: 24mm
Outside diameter: 29mm
Material thickness: 2mm.