Rear Axle Housing with Differential for 1992 Mercedes-Benz 500E

Only used with acceleration skid control (asr).

Less ring gear and pinion.

As required 1.6mm. As required 1.60 mm.

As required 1.45 mm.

As required 1.55 mm.

As required 1.7 mm. As required 1.70 mm.

Used without automatic locking differential (asd).

6X45 MM
Diameter: 6mm.

Ring gear to differential case.

As required 0.9 mm. 0.90 mm.

1.80 mm.

Spacer Washer

2.20 mm.

2.50 mm.

2.00 mm.

Bearing cover.

Screw

For hinge. Hinge to front door.

Rs Rear Axle Differential

Axle shaft to interior flange. Axle shaft to rear axle shaft flange.

As required 2.65 mm.

Spacer Washer

As required 3.4 mm. 3.40 mm as required.

As required 2.85 mm.

Spacer Washer

As required 3.2 mm. As required 3.2mm. 3.20 mm as required.

As required 3.0 mm. 3.00 mm as required.

As required 1.75 mm. Axle shaft flange to axle housing.

As required 1,3 mm.

As required 1.8mm. As required 1,8 mm.

As required 1.5mm. As required 1,5 mm.

As required 1,7 mm.

As required 1,1 mm.

As required 1,4 mm.

As required 1,0 mm.

1.65 mm.

As required 1.5mm. 1.50 mm.

As required 2.1 mm. 2.10 mm.

As required 1.8mm. 1.80 mm. As required 1.85 mm.

As required 1.7 mm. 1.70 mm.

Spacer Washer

As required 2.0 mm. 2.00 mm.

Drive pinion bearing.

Drive pinion. Pinion bearing. Only used with asd.

Drive pinion.

Collar Nut, Ra Transm

M26X1.5
Diameter: 26mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 38mm
Width across flats: 30mm. Joint flange to bevel gear. Screw fitting joint flange. Flange to drive pinion. Only used with asd.

M10X25
Diameter: 10mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Console mounting, left. Mount to body. Protective plate to frame m 10x25. Shock absorber to transverse control arm. To 001 542 63 20. Hydropneumatic spring leg to rear axle. Shock absorber to rear axle.

Hexalobular Screw

Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm.

Rear axle housing with differential.