Rear Springs and Suspension Standard Suspension for 1998 Mercedes-Benz C230

As required. Color marking: 1 x blue.

As required. Color marking: 1 x blue/2 x yellow.

As required. Color marking: 1 x blue / 2 x gray.

Upper. stud quantity: 3 (13mm). Top. Stud count: 3 (13mm). As required. Number of burls: 3 (13 mm).

Upper. stud quantity: 2 (9mm). Top. Stud count: 2 (9mm). As required. Number of burls: 2 (9 mm).

(bracing).

Gefahrgutkennzeichen: 2.4 Gas pressure shock absorbers.

"esprit".

M10X60
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Engine mounting to engine support. Pitman arm to steering box assembly. Engine mount to engine carrier. Hydropneumatic spring leg to spring control arm. Shock absorber to lower control arm. Shock absorber to spring control arm.

Refrigerant compressor to support. Bearing cup to bearing bracket.

M10
Diameter: 10mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm. Rod to torsion bar. Shock absorber to frame. Trailer coupling to bracket. Camber struts to wheel bearing m 10. Shock absorber to spring control arm m 10. Axle housing to rear subframe. Tie rod to wheel bearing m10.

Shock absorber to frame.

Bumper to body. Shock absorber to frame. Hydropneumatic spring leg to frame.

M10X1
Diameter: 10mm
Strength / hardness class: 8
Thread code letter: M
Thread pitch: 1mm
Width across flats: 16mm. Front shock absorbers to frame. Bumper to body. Shock absorber to frame m 10x1. Hydropneumatic spring leg to frame m 10x1.