Steering Gear and Steering Linkage for 2008 Mercedes-Benz CLS550

Proportional Valve

(repair kit).

Right outside.

M14X1.5
Diameter: 14mm
Strength / hardness class: 8
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 21mm. Tie rod to steering arm. Energy-absorbing unit to plate. Cross strut to shackle. Outside left. Track rod left. Mounting and clamp to energy-absorbing unit.

Left. Right.

Clamp

Outer left and right. 15.2-18.5 MM. Exterior. 15.2-18.5 MM. Boot to steering. 15.2-18.5 MM. Left and right outside. 15.2-18.5 mm.

Mounting plate to integral carrier. M12X1.5X25
Diameter: 12mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Steering to front frame-type integral support. Plate to frame-type integral support.

To steering. Steering coupling. At steering gear.

Steering coupling to steering gear. M8x39. Steering joint to steering gear and to steering shaft. Steering coupling to steering shaft and to steering. Lower steering shaft to upper steering shaft. Steering coupling to steering shaft m8 x 40. Screw universal joint. Steering coupling to steering shaft m8 x 39.

For short oil line, with o-rings.

Oil line, long.

Steering gear. Fastener. Housing.

Steering gear. Parts kit.

Speed-sensitive steering valve Y10. 2-PIN SLK2.8
Model 1: SLK
Model 2: 2.8
Slots: 2
Release tool: W220 589 01 99 62. Shutoff valve activated-carbon filter y58. 2-pin slk2.8
model 1: slk
model 2: 2.8
slots: 2
release tool: w220 589 01 99 62.

Speed-sensitive power steering conn. Connector activated charcoal fil. Separation point, engine hood contact switch x42/30. 2-pin mqs
model 1: mqs
slots: 2
release tool: w220 589 01 99 60.

Crimp Tml. Pin Contact

Washer nozzle heater. 0.5-0.75 MM2 MQSLeitungsquerschnitt Min/Max: 0,5-0,75mm2Oberflächenschutz PINs: SnELA: +Model 1: MQSRelease tool: W220 589 01 99 60Crimp tool: W220 589 01 99 86. FUEL DELIVERY PUMP CONTROL UNIT N118. 0.5-0.75 MM2 MQSLeitungsquerschni ...