Line Arrangement of Hydraulic System for 2009 Mercedes-Benz SL600

From radiator to y-piece with temperature sensor.

Hose to hose. M8X25
Diameter: 8mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Cable on valve. High-pressure expansion hose holder m8x25. Support mount. Left seat, inner. Side wall holder at assembly frame, left. To power steering pump.

From radiator to reservoir.

Hexalobular Screw

6 x 16mm.

From valve block front to suspension strut front right.

From expansion tank to additional tank. Right. For molded hose. Line to rear floor center. Fastening, cable, rear center. High pressure expansion hose & connecting hose to side member. Oelverbindungsschlauch durch traeger oelvorratsbehaelter.

From valve block front to suspension strut front left.

From y-distributor to valve block front.

From t-piece to return accumulator rear (inlet).

From t-piece to return accumulator rear (return).

From inlet oil line to valve block rear.

From return oil line to valve block rear.

From valve block front to separation point on main floor (inlet).

From valve block front to separation point on main floor (return).

From pulsation damper to t-piece (return).

Flex. High-Pressure Hose

Pump to separation point.

Pressure hose to pump. M6X20
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Delivery line to pump. High-presssure hose on pump. Hydraulic line to pump. High pressure line to pump.

Hose to pump. To a220320 56 72, 43 72, 37 72, 45 72. A 220 320 43 72. Pump to pulsation damper.

To refrigerant compressor.

From valve block rear to suspension strut rear right.

From valve block rear to suspension strut rear left.

From pressure reservoir to valve block rear.

From rear valve block to connecting hose left rear.

Line

From rear valve block to connecting hose right rear.