Trunk Lining for 2025 Mercedes-Benz CLE 53 AMG®

Load Cmprt. Well Cover

Trim, inner, spare wheel well.

Trunk floor.

Padding, right, cargo area floor.

Trim, trunk, left.

Left trim.

Lining to backrest frame
Diameter: 7,8mm. Cable duct on hinge lever
diameter: 7,8mm. Fastening, sidewall
diameter: 7,8mm. Left covering
diameter: 7,8mm. Right trunk lining
Diameter: 7,8mm. Bottom trunk sill
diameter: 7,8mm. Mount, right trim
Diameter: 7,8mm. Protective padding mount
Diameter: 7,8mm.

Cover, hem, fender, rear, right.

Left cover to D-pillar. Lower left D-pillar.

Trim to D-pillar. Lower part. Left cover mount to body-in-white.

Rear anchoring lug
Diameter: 8mm. Left and right rear load compartment
Diameter: 8mm. Front trunk
Diameter: 8mm. Tie-down eye, trunk/cargo area
Diameter: 8mm. Rear left and right load retainer
Diameter: 8mm.

Rear floor lining. Cargo retainer to floor. Load retainer. Rear anchoring lug. For bracket. Left and right front. To left holder. Rear left. Right holder. Cover, tie-down eye, trunk/load compartment.

Trim, trunk, right.

Vehicle tool kit. Holder, jack. Holder, tool box, trunk.

Front.

Left.

Plug-in fastener, rear-end floor.

Left.

In right trim. Switch, backrest release, rear seat, right, cargo area.

Rear lid to hinge lever. Drive to rear pillar. Pipe line to shock absorber leg reinforcement. Strut to front cross member. Bracket to car floor. Cooling pipe to front cross member. Engine hood upper catch to engine hood. Partition panel. Strut to stiffening,front central.

Left.

Left.

Acceleration sensor to holder. M6X19
Diameter: 6mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Holder to left load compartment well. Holder mount. Support to left and right wheel well. Left mounting support to body-in-white. Holder to cockpit crossmember. Left sensor strip. Intake line to intake manifold.