Rear Axle Housing with Differential for 1986 Mercedes-Benz 560SEL

Rear axle housing with differential abs/ags 1:2.65.

Rear axle housing with differential 1:2.47.

M24x1,5. Oil refilling. For oil drain and oil filler. For oil filler, transmission. (for oil drain and oil filling). (oil filling and oil drain at transmission). For filling in oil or draining off oil resp. At transmission for filling in oil up to transmission 6515822. For oil drain and oil tilling.

Less ring gear and pinion.

As required 4.0 mm.

As required 2.9 mm.

As required 3.1 mm.

As required 3.5 mm.

As required 3.4 mm.

Less lining. With 5 shackles.

6X45 MM
Diameter: 6mm.

1:2,65.

Z=39.

Ring gear to differential case.

Ring gear bearing. Differential gear. Right.

As required 0.9 mm. 0.90 mm.

1.80 mm.

2.50 mm.

Spacer Washer

1.60 mm.

Bearing cover.

For hinge. Hinge to front door.

Axle shaft. Interior flange.

As required 3.4 mm. 3.40 mm as required.

As required 3.3mm. 3.30 mm as required.

Window

As required 3.0 mm. 3.00 mm as required.

Spacer Disk

As required 2.4 mm. 2.40 mm.

Spacer Washer

As required 1.9 mm. 1.90 mm.

Spacer Washer

As required 1.8mm. 1.80 mm. As required 1.85 mm.

Spacer Washer

As required 2.0 mm. 2.00 mm.

As required 1.7 mm. 1.70 mm.

2.05 mm.

Drive pinion bearing.

Drive pinion. Pinion bearing. Only used with asd.

Drive pinion. Joint flange.

Nut

M26X1.5
Diameter: 26mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 38mm
Width across flats: 30mm. Joint flange to bevel gear. Screw fitting joint flange. Flange to drive pinion. Only used with asd.

Oil drain. With collar.

Limited-slip differential.

Rear axle housing with differential. M 14 x 1,5. Differential gear. Right m 14x1,5.

Rear axle housing with differential abs 1:2.82.

As required 1.7 mm. As required 1.70 mm.

As required 1.45 mm.

As required 1.55 mm.

As required 1.3 mm. As required 1.30 mm.

As required 1.65 mm.

Z=34.