Rear Axle Housing with Differential for 1993 Mercedes-Benz 400SEL

Axle Housing

Rear axle housing with differential asr 1:2.82.

Used without with acceleration skid control (asr).

M24x1,5. Oil refilling. For oil drain and oil filler. For oil filler, transmission. (for oil drain and oil filling). (oil filling and oil drain at transmission). For filling in oil or draining off oil resp. At transmission for filling in oil up to transmission 6515822. For oil drain and oil tilling.

As required 1.7 mm. As required 1.70 mm.

As required 1.3 mm. As required 1.30 mm.

As required 1.6mm. As required 1.60 mm.

As required 1.5mm. As required 1.50 mm.

As required 1.40 mm. As required 1.4 mm.

1:2.82.

Ring gear to differential case.

Spacer Washer

As required 1.4 mm. 1.40 mm.

Spacer Washer

1.60 mm.

Spacer Washer

1.80 mm.

Spacer Washer

As required 1.5mm. As required 1.50. 1.50 mm.

Bearing cover.

Bearing cover to axle housing. Inner joint. Outer left.

Seal Ring

Axle shaft. Interior flange.

Repair Kit

Axle shaft to interior flange. Axle shaft to rear axle shaft flange.

Inside.

As required 2.8 mm. As required 2.70 mm. 2.80 mm as required.

Window

As required 3.0 mm. 3.00 mm as required.

Spacer Washer

As required 3.1 mm. 3.10 mm as required.

Spacer Washer

As required 3.4 mm. 3.40 mm as required.

As required 2.65 mm.

As required 2.1 mm.

As required 1.5mm. As required 1,5 mm.

As required 1,3 mm.

As required 1.6mm. As required 1,6 mm.

As required.

As required 1,0 mm.

As required 1,1 mm.

As required 2.4 mm. 2.40 mm.

Spacer Washer

As required 2.0 mm. 2.00 mm.

2.05 mm.

As required 1.6mm. 1.60 mm.

Spacer Washer

As required 1.9 mm. 1.90 mm.

1.65 mm.

Pinion bearing. Only used with asd. Drive pinion.

Drive pinion bearing. Outer bevel gear.

Seal Ring

Drive pinion.

Propeller shaft 110mm.

Collar Nut, Ra Transm

M26X1.5
Diameter: 26mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 38mm
Width across flats: 30mm. Joint flange to bevel gear. Screw fitting joint flange. Flange to drive pinion. Only used with asd.

End cover.

End cover to housing.

Washer

Fastening parts to spring link. Mounting parts.

Rear axle housing with differential. M 14 x 1,5. Differential gear. Right m 14x1,5.